iprep 10.7 wont boot from usb

[paintguy84]

if its on a sata port, the number should start with a 9 if using via card. Its not goin to rcognize the drive because its erased, but you can still flash it, as long as you know the port it should work fine, just remember to get it into vendor mode first then open dosflash32. When you first open dosflash32 it asks you to send intro to something other than your liteon click no, then drop down which port your drive is on, thats why its important to know what sata port its on. It will have all blank properties but you can still flash it.

[mrsmackdaddy]

will u be on tomorrow night? my gf yelling at me to get off the computer! been trying to get this for a week and a half

thx for all the help

[paintguy84]

yeah man we will get it, hope you didnt erase your dvd drive tho.

[paintguy84]

when you select a port on the dosflash window it tells you if it is a sata port or an ide port so just make sure you pick sata port, be careful about this stuff.