I also have troubles with iprep

[sadalius]

What was the two errors?? You shouldn't get any errors for it to work properly.

[MsK]

I got iprep working!!!!!!!!!
now, under the mtkflash box, i have a mtkflash and DoSflash compatible in green.........NVIDIA MCP61 Serial ATA controller....all good so far?

in the samsung box i had samsung ixtreme 1.41, in the benq box i had benq ixtreme 1.41.....i clicked prepare destination, got 2 errors, but the a success message........that good?.......

these are now the contents of my MS.......its now called IPREP_101, and it contains:-
3 folders(BACKUPS, CFW, and Tools)
8 bat files(Autoexec,dben,dsam,fben,fsam,intro,rben,rsam

does this sound right?

There is no such release as samsung 1.41 !

Only the benq release was revised. would be interested in knowing what the errors are.

As for contents.. yep, looks ok 2 me

Before you go any further lets clarify some details...

what drive are you flashing??
If you are flashing a BenQ you only need the BenQ firmware & vice versa for the samsung.

If you plan to flash multiple drives then fine.. prepare the flash key/floppy with both

if not.. then don't add them to the arrangement as this could confuse matters for yourself

[TurbotimE]

but isnt the samsung firmware needed for me to be ableto format a drive?........also, how do i find the 4 character port number?..........in iprep i used, it isnt shown!

ok.......i managed to format the usb using only the benq fw.....still had 1 error though.......now have the 3 folders as before, now only have 5 bat files......

[MsK]

but isnt the samsung firmware needed for me to be ableto format a drive?........also, how do i find the 4 character port number?..........in iprep i used, it isnt shown!

nope.. you only need 1 firmware loaded to "prepare destination"

port number?? ...expand

[MsK]

ok.......i managed to format the usb using only the benq fw.....still had 1 error though.......now have the 3 folders as before, now only have 5 bat files......

what was the error??

[TurbotimE]

the tutorial i have here printed(from 360mods), says i have to enter a port number in dosflash eg. DosFlash r xxxx a0 1 4 orig.bin 0
where x is the port number

[MsK]

ok.. forget that tutorial

you are using iprep 6 now & it configures everything for you - commands are also made simple there is a great video tutorial on here that explains it all.

http://www.robinhoodsplayground.com/for ... =110&t=277

[TurbotimE]

ok.......i managed to format the usb using only the benq fw.....still had 1 error though.......now have the 3 folders as before, now only have 5 bat files......

what was the error??

exception processing message c00000a3 parameters 75b6bf7c 75b6bf7c 75b6bf7c

[TurbotimE]

thanx for the video link........i was rapidly giving up hope on that tut........it used older iprep also which sucked as i couldnt follow it to the letter.............thank you all;)

[MsK]

ok.......i managed to format the usb using only the benq fw.....still had 1 error though.......now have the 3 folders as before, now only have 5 bat files......

what was the error??

exception processing message c00000a3 parameters 75b6bf7c 75b6bf7c 75b6bf7c

Thats a windows error not an iprep error... google gods should resolve that 1 for you

http://www.google.co.uk/search?hl=en&q= ... arch&meta=


Just make sure after you do your dump // you boot back into windows & check the dump & key... also back it up somewhere safe

[TurbotimE]

so i dont need to use dosflash at all?..............also, what is the 2 second d1 thing?
so i need fwtoolkit for checking the key, and creating my personal hacked fw? the vid dont show that

[TurbotimE]

Am i right in thinking i need fw toolbox for checking keys, dumps etc......?.......also, what do i use to get the key from my orig.bin to the hacked.bin?

[CoFree]

the video shows all that
it will build your hacked firmware after the dump.just like in the video.
firmware toolbox is a program that you load your firmware into and it will show you your key

[MsK]

so i dont need to use dosflash at all?..............also, what is the 2 second d1 thing?
so i need fwtoolkit for checking the key, and creating my personal hacked fw? the vid dont show that

iprep uses mtkflash & simplyfies the command lines down. it also builds your hacked firmware automaticly after the dump.. Just follow the video tut & read the on screen prompts


as for the d1.. if that doesn't work then the process halts
It's basicly the initial reading & accessing of the drive
If you get stuck here it's most likely a problem with your sata chipset/card

firmware toolbox can flash certain drives under windows & it can handle most drive dumps/firmwares for checking/ modifying keys / spoofing etc. use it in this case only to validate your key

Am i right in thinking i need fw toolbox for checking keys, dumps etc......?.......also, what do i use to get the key from my orig.bin to the hacked.bin?

as explained above.. iprep will automate the process

[TurbotimE]

awesome!!!!!...so the trick is when the dump and create is done, then i take 1 of my orig.bin and check the key, also take my hacked.bin and see if the key matches?..........if it does, then i just boot to my flash stick again and flash the hacked.bin?..........am i getting that right?