Flashing a liteon !

The place to ask your questions about the Xbox 360
Post Reply
EseChiko
Peasant
Peasant
Posts: 3
Joined: Mon Feb 02, 2009 10:34 pm

Flashing a liteon !

Post by EseChiko »

Heyy guys, i first would like to thank you by taking the time to read my post ^-^
im new at flashing, and yes i've seen MANNY and MANY of CoFree videos on flashing a Lite-On.

on one of Cofree videos i seen "http://ca.youtube.com/watch?v=JIrqdRALLSs" CoFree used a USB to do it correct ? im going to buy the CK3 Pro today with the probe.

and i was wondering if you still need to connect a Sata cable ? i wasn't sure if your still suppose to connect a sata cable.

Thanks for the help guys! if you have more to say on how to do it (i know there's a lot of tutorials) but just incase you wanna tell me more, it will be well appreciated!
iamwatt
Ally of Robinhood
Ally of Robinhood
Posts: 875
Joined: Wed Jan 21, 2009 5:50 pm
Location: new york

Re: Flashing a liteon !

Post by iamwatt »

you are still gonna need to connect the drive to a sata port, preferably the via sata card that cofree mentions in his tuts. check it out.

http://tekgems.com/Products/la-pci22-vt6421a.htm

the information is sent to the drive through the sata connection so theres really no way around that
EseChiko
Peasant
Peasant
Posts: 3
Joined: Mon Feb 02, 2009 10:34 pm

Re: Flashing a liteon !

Post by EseChiko »

iamwatt wrote:you are still gonna need to connect the drive to a sata port, preferably the via sata card that cofree mentions in his tuts. check it out.

http://tekgems.com/Products/la-pci22-vt6421a.htm

the information is sent to the drive through the sata connection so theres really no way around that

Thanks for the reply! ummm .. how do i know if i have a via chipset :P because CoFree didnt right? and also, the sata port on my motherboard correct :P ?
User avatar
CoFree
Robinhood
Robinhood
Posts: 13414
Joined: Wed Nov 07, 2007 1:38 pm
Location: In the Forest
Contact:

Re: Flashing a liteon !

Post by CoFree »

if you are using the new jungle you dont need a via chipset.In fact if you have a via chipset i would tell you to use iprep to flash with.
but yea iamwatt is right
you have to have the sata hooked up because that is what that is what the flash goes in the drive on.
"FIGHTING TYRANNY in a TECHNOLOGICAL NOTTINGHAM"
Image
No Questions by PM.
iamwatt
Ally of Robinhood
Ally of Robinhood
Posts: 875
Joined: Wed Jan 21, 2009 5:50 pm
Location: new york

Re: Flashing a liteon !

Post by iamwatt »

EseChiko wrote:Thanks for the reply! ummm .. how do i know if i have a via chipset :P because CoFree didnt right? and also, the sata port on my motherboard correct :P ?
no problem kid! what cofree just said. . . --> lol! :)
EseChiko
Peasant
Peasant
Posts: 3
Joined: Mon Feb 02, 2009 10:34 pm

Re: Flashing a liteon !

Post by EseChiko »

Wooot! alright guys that really helped a lot! :D Thanks again for all your help! ill let you know if i need anything else! ^-^
Post Reply

Return to “Beginners”