hi all
I want to put my liteon back to stock. I use JF ,can someone tell my the steps to do this and the files i need, ( i have my org flash)
thnx
liteon stock
Re: liteon stock
first you will need Lite-On OFW i think the new LT fw has it with the files if not you will find them about
open jf in firmware tool 32 put ur dummy bin in source firmware.
then put the Lite-On OFW in the target firmware press spoof source to target
now make sure your drive is on the right port you dont need the com port for this
go to mtk flash 32 tab and go to lite on erase and follow instructions e.g: turn of drive and back on quick,
if everything goes ok you should be in status 72
then press erase after that press write after the banks are written thats it .
im not a pro but this worked for me all the best.
open jf in firmware tool 32 put ur dummy bin in source firmware.
then put the Lite-On OFW in the target firmware press spoof source to target
now make sure your drive is on the right port you dont need the com port for this
go to mtk flash 32 tab and go to lite on erase and follow instructions e.g: turn of drive and back on quick,
if everything goes ok you should be in status 72
then press erase after that press write after the banks are written thats it .
im not a pro but this worked for me all the best.
here