LIGHT-ON 74850C PROBLEM

[ebtank]

Ok guys I am not new to flashing a xbox have done many but this 1 I got was 1 that I had already flashed before was just gonna update it. So when I flashed it to lt + it wont read any games orig or backups flash it back to orig firmware and it plays orig games fine I am lost ?????........ I have done it over and over every time the same thing I even tried replacing the drive with another just like it and still the same thing????? .....If any of you could help me out would be great

[HaGGardSmurf]

Is the key correctly copied into LT+?

Also, is this the original drive for the console?

[CoFree]

you can also try flashing it to a older firmware to see if it will play backups that are not ap25
just to do a double check

[ebtank]

I would say so I am using the dummy bin I extracted from the drive plus it works when I go back to orig firmware I even tried extracting the dummy again and using that with no luck

[ebtank]

you can also try flashing it to a older firmware to see if it will play backups that are not ap25
just to do a double check

Tried that to with both drives no luck

[CoFree]

ok stop messing with 2 drives till you are sure the original drive is bad (if it plays original games then its not bad)
just work with the one drive

I even tried extracting the dummy again and using that with no luck

not sure what you are saying
what did you do

[CoFree]

also
you are 100% that this is the original dvd drive that was stock to the console

[ebtank]

Yes it is the original drive I was the 1 who first opened it to mod it I have the original dummy bin from the first dump also the drive was on ixtream 1.51 so when I went to upgrade it I use jungle flasher so I did the get dummy from ixtream and have tried both

[CoFree]

ok
i on the same page now

it sounds like you flashed in the wrong key somehow
i know,i know
but i dont see what else could be causing your trouble

check to make sure both keys are the same
from the first dummy and from the dummy from ixtreme (they should be)
if not one of them should be the right key

if they are then
i would start with the first dump dummy and build a hacked firmware with it
and flash 3 different firmware till one worked
stock firmware,old hacked firmware ,maybe even the one that was in it before you started all this and the the latest LT+
if they did not work i would start with the dummy from ixtreme and do the same three steps.

also does this lite on dummy have all the files or are some of the serial data missing

[ebtank]

Ok I got it tried what you said and no luck with the original drive talked to the owner he said he had been getting open tray errors and unable to read disc so tried what u said with another drive and when I flashed IX 1.51 everything worked but when I went to LT + it didn't then I realized I wasn't using the newest jungle flasher that I had so tried jf 1.76 and worked fine. I didn't realize u needed the newer JF for LT+ must of just automatically used it when I did others idk? ??? ........but anyways thanks alot its good now

[CoFree]

good stuff man
good job

[HaGGardSmurf]

Damn you need the new JF for LT+?

Things like the slip my mind

Guess your key wasn't being copied over correctly or to the correct place. Thats why I usually update my JF