Just to be sure

[pluto_00]

hey guys
sorry to ask all this but i got a lite-on from a friend that want me to flash it for him as I never did one and I don't have much time lately I didn't keep up with whats happening on the lite-on drives,

So what I can say is that is deinstalled my via drivers and installed the portio32
I still have a yellow ! in my hardware list is that normal ?

I have the Iprep v008.8
I've read some thing going fully for jungleflasher others on going iprep then jungleflasher ...
So what is the best way to do the trick ?


As for hitachi , sammy's and benq's I used the power of the 360, for the lite-on the CK3 pro + probe arrived,
What i'm not sure about here is what power cable to use for the drive,
I've got a green one and a blue one , on the blue one i can connect the probe also, so if I think a little logically (thats sometimes hard )
The green is for if you don't have a spear to connect between drive and ck3 tool
The blue is for if you do have a spear to connect between drive the tool and the spear connected also ...

[sadalius]

I like jungleflasher, don't get me wrong. But for those that are out to get the job done, like you are flashing this for a friend, I would use iprep. Since you've never done a lite-on before, it's kind of traumatic for your computer to lock up after hitting the lite-on erase button and not know what to do to recover it. It's not really all that bad, but with a serial cable, sata cable, your via, ck3 and iprep, you won't have to worry about your computer locking up on you.

[pluto_00]

It's not really all that bad, but with a serial cable, sata cable, your via, ck3 and iprep, you won't have to worry about your computer locking up on you.

Serial cable ? will USB cable do the trick also ? or do I need both

[lilrevuk]

serial cable only for iprep I'm afraid...

ATM, there's isn't a USB Driver for DOS

[chalky333]

can i use MAXIMUS 360 XTRACTOR with iprep v008.8r with this

[CoFree]

it should work like the ck3 pro with probe

[pluto_00]

SUCCES !!

Jungle flashed it all the way ...

I have a pci card with via but with the portio32 driver

I didn't use a serial cable or Iprep

King of the jungle lol


Thnx for helping out !

[lilrevuk]

Good work my man, see the lite on ain't as beastly as you may think

[sadalius]

Nope, if your equipment is working right with jungleflasher, it's pie. There are a few hoops to jump through, tray half open, R707, etc, but still easy if your stuff's right

Glad you got it man!!!

[pluto_00]

yeah man
hardware that doesn't work or equipment i can't thrust I just throw out of the window