You will need to havae a good drive key for this to work
PLEASE NOTE THIS IS ONLY THE COMMANDS FOR IPREP 9
First of all you will need to make your custom firmwarew with Jungle Flasher (JF)
For this process you will need Iprep and Jungle Flasher which you can get from here viewtopic.php?f=112&t=48" onclick="window.open(this.href);return false;
Lets get started.
1) Open Jungle Flasher
2) Load your source firmware ( this is the dummy.bin which you would have got when you clicked get key button in the dvd32key tab)
3) Click no when prompted to auto load ixtreme.
4) Load "ix16-liteon838" as your target firmware.
5) Click on "SPOOF TO TARGET" (all the information from you dummy.bin will be copied and your custom firmware will be created.
6) Check that your key has copied correctly from your source firmware.
7) Now save the file as litcfw.bin
You will need to make a bootable usb device either usb or floppy ( usb device is much better)
once you have done that open the device up
1) You will see a folder called backups you will need to open that folder. and create another folder called 1234567
2) Open that folder and create another folder called 12345
3) Copy and paste into that folder your custom firmware that you made in Jungle Flasher "litcfw.bin"
you should end up with the folders like this BACKUPS\1234567\12345\litcfw.bin
You will need to have the tray of your drive half open, if you drive has locked up and wont open there is an attached pic on how to open the drive manually. All you need to do is push the grey bar sideways with just enought force for it to open.
Connect the power to the drive but do not switch it on, also leave the sata cable out
Boot into your iprep device
1) When your at the c:\ prompt ( connect the sata cable and the power cable and switch the drive on)
2) TYPE flit 1234567 12345
3) Follow the screen instructions
4) When prompted select (W) for write
5) It will ask you for a file name give it as "litcfw.bin ***without the ""
6) Press enter / return it will then erase your drive and write the custom flash for you.
7) After that has completed turn off your drive and put it back in your 360 and test.
Try an original game and not a backup if that works your drive is more than likely flashed ok (99%) if that works try your backup.
 |
