Robin Hoods Playground

Just a quick tip: If you take a sharpie and mark the drive/connector at the same time it will be really hard to put in upside down. I never bought the ck3 so I have to pull the power manually during flashing, never had an issue using the sharpie trick.

How do you know it's in mode b? Usually the green blinking light and no eject means you f-d up the flash and the drive is blank not mode b. Mode b is for hitachi drives only, not liteons. The liteon version of mode b is having the drive half open. In fact, take a screen cap of the mtkflash32 tab wit...

Try to stay in the same thread, it's not going to help you starting new threads all over

http://robinhoodsplayground.com/forum/v ... 63&t=10797" onclick="window.open(this.href);return false;

Nice lee, that's longer than some of the new xboxs lasted.

My repaired box made it through a 7 hour stress test yesterday too. Looking good so far.

No eta on ixtreme 1.7 yet but trust me, you'll know about it when it gets released. I'm guessing it comes out just before xmas.

So I have an old xenon 1.0 that died on me a while back. Was giving me the rrod even after a textbook x-clamp mod (it did work for 3 weeks though) and heat gun attempts. I was thinking about selling it but decided to give the heat gun one more try, all or nothing. I heated the bottom up for about 4 ...

So it's still possible to pull keys with a probe from a previously flashed liteon? I thought that stuff got wiped out when you erase it.

Did you uninstall your sata driver? The Via 6421 is known to freeze your pc when your firmware is erased from the drive.

You said it's flashing red? What is the error code exactly?
http://forums.xbox-scene.com/index.php?showtopic=484726" onclick="window.open(this.href);return false;

If it's e18 the xclamp mod failed. If its e64, 65, or 66 it's a bad flash.

Hmm..... Since you flashed it to a l83 earlier maybe you could try the command l83 1234567 12345 w. I read that just plain 1234567 12345 w would work as well but I haven't tried that one. I'm running out of ideas. Could you write down the error message in full and post it? Edit: Stupid question I'm ...

I followed the 1.51 guide with jf 1.66 and it went fine. Some minor things are different like the buttons in dvdkey 32 but overall the process is the same. You should have no problems but make sure you're quick when power cycling the drive while erasing/flashing the liteon. If you miss the 5 second ...

The command flit you are using is for the old version of iprep 9. The command you should be using for iprep 10.7 is "l74 1234567 12345 w"

Just follow the JungleFlasher pdf guide v1.51 http://robinhoodsplayground.com/forum/viewtopic.php?f=197&t=4356" onclick="window.open(this.href);return false; other good tutorials: Key ID extraction guide http://robinhoodsplayground.com/forum/viewtopic.php?f=197&t=3201" onclick...

It is possible that your motherboard doesn't support booting from usb. In this situation you'll need to either make a bootable cd or plug your sata pci card and usb into another pc. You'll need to make the iprep usb again if you switch computers.

at which step are you getting the bad filename error message? And did you try using the command "l74 1234567 12345 w" with the modified firmware in the proper folder?